DXF Bulge - the trig expressions
Posted by
Mark Fraser
on 2002-04-11 11:44:05 UTC
When you deduct a simple way to convert dxf bulge to gcode i,j
expressions, I'd appreciate the result. Doug Yeager's
(now GPL'd) ACE converter does not have the correct forumula,
and there are times when I'd like to use ACE to convert the
DXF output from VISIO to another, more usable set of arc data.
Here's what I dug up; my attention span is too short (and my
reverse engineering of Doug's source code for ACE is too rusty)
to do it myself / mark
http://www.faqs.org/faqs/CAD/autolisp-faq/part2/section-6.html
expressions, I'd appreciate the result. Doug Yeager's
(now GPL'd) ACE converter does not have the correct forumula,
and there are times when I'd like to use ACE to convert the
DXF output from VISIO to another, more usable set of arc data.
Here's what I dug up; my attention span is too short (and my
reverse engineering of Doug's source code for ACE is too rusty)
to do it myself / mark
http://www.faqs.org/faqs/CAD/autolisp-faq/part2/section-6.html