RE: [CAD_CAM_EDM_DRO] ?? Repeat cutting routines??

Yeh, that's what I said a couple of posts back, but you said it so much
better.

> -----Original Message-----
> From: Tim Goldstein [mailto:timg@...]
> Sent: Friday, May 10, 2002 14:50 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] ?? Repeat cutting routines??
>
>
> Time for a CAD/CAM program. I do it in Vector and it is called Contour
> Tooling. Here is the code from Vector to cut .5" deep in .1"
> increments on a
> 1/4 circle and to make all the cuts in the same direction. Just a
> click of a
> check box to have to tool paths alternate direction instead of lifting and
> going to cut from the same end.
>
> N10 G00 X0. Y1. Z0.5
> N11 Z0.1
> N12 G01 Z-0.1
> N13 G02 X1. Y0. I0. J-1.
> N14 G00 Z0.25
> N15 X0. Y1.
> N16 G41 Z0.1
> N17 G40 G01 Z-0.2
> N18 G02 X1. Y0. I0. J-1.
> N19 G00 Z0.25
> N20 X0. Y1.
> N21 G41 Z0.1
> N22 G40 G01 Z-0.3
> N23 G02 X1. Y0. I0. J-1.
> N24 G00 Z0.25
> N25 X0. Y1.
> N26 G41 Z0.1
> N27 G40 G01 Z-0.4
> N28 G02 X1. Y0. I0. J-1.
> N29 G00 Z0.25
> N30 X0. Y1.
> N31 G41 Z0.1
> N32 G40 G01 Z-0.5
> N33 G02 X1. Y0. I0. J-1.
> N34 G00 Z0.75
>
>
> Tim
> [Denver, CO]
>
> ----- Original Message -----
>
> > To clarify: my objective is to have an AUTOMATIC routine.
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>