CAD CAM EDM DRO - Yahoo Group Archive

It's Alive, Alive, Alive!

Posted by cncnovice
on 2002-06-15 17:51:15 UTC
Hi list,
Thanks to all for your help and the information posted on this board,
my machine moved in all three axis (axies? - whatever) today.

Specs:
48" x 48" x 7" movement - 1/2" aluminum stationary table - mini-mill
on Z axis - Gecko 201 drives - Bob Campbell's parallel port board
(really great design and quality - Geckos too) -
three, 60 volt, 5 amp power supplies - 1" Acme lead screws - homemade
antibacklash nuts. Still some work and tweeking to do, but the end
is near - will soon go into production.

Six months of only weekend work; too many mistakes to admit, a bit
more work to do, but I was beginning to feel as though this day would
never arrive. When it is more presentable, I will post pictures.

Thanks all, I hope I can soon begin to contribute help to others as
you all have contributed help to me.

Best regards,
John Champlain

Discussion Thread

cncnovice 2002-06-15 17:51:15 UTC It's Alive, Alive, Alive! studleylee 2002-06-15 18:02:28 UTC Re: It's Alive, Alive, Alive! Alan Marconett KM6VV 2002-06-15 18:41:53 UTC Re: [CAD_CAM_EDM_DRO] It's Alive, Alive, Alive! JanRwl@A... 2002-06-15 20:30:13 UTC Re: [CAD_CAM_EDM_DRO] It's Alive, Alive, Alive! John 2002-06-16 04:08:38 UTC Re: [CAD_CAM_EDM_DRO] It's Alive, Alive, Alive!