EMC users
Posted by
Ray Henry
on 2002-08-08 06:28:55 UTC
Paul Corner sent me a new map of folk using the EMC. He reports that
there are now more than 100 pins around the world. You can see it at
www.linuxcnc.org on the cover page.
If you are using the EMC or playing with it, and would like your location
included with a pin, contact Paul for instructions.
Paul <paul.corner@...>
Thanks
Ray
there are now more than 100 pins around the world. You can see it at
www.linuxcnc.org on the cover page.
If you are using the EMC or playing with it, and would like your location
included with a pin, contact Paul for instructions.
Paul <paul.corner@...>
Thanks
Ray