Re: [CAD_CAM_EDM_DRO] servo motor replacement
Posted by
Les Watts
on 2002-08-16 16:43:03 UTC
Voltage constant, torque constant,continous and peak torque, max voltage,
and moment of inertia will define it pretty well. Often these are not all
on the label but can be measured or estimated. Encoder specs are
of course also important if they are on the motor.I might have the type of
servo you need... tell me about it. Brand, label specs, size , etc.
Les
Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.alltel.net/~leswatts/shop.html
and moment of inertia will define it pretty well. Often these are not all
on the label but can be measured or estimated. Encoder specs are
of course also important if they are on the motor.I might have the type of
servo you need... tell me about it. Brand, label specs, size , etc.
Les
Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.alltel.net/~leswatts/shop.html
----- Original Message -----
From: "dkmach2" <dkmach2@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, August 16, 2002 7:20 PM
Subject: [CAD_CAM_EDM_DRO] servo motor replacement
> I need to replace the servo motor on a tree j300 milling machine.
> What specifications do I need to be concerned with? Which ones can
> vary without problems?
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
dkmach2
2002-08-16 16:20:53 UTC
servo motor replacement
Les Watts
2002-08-16 16:43:03 UTC
Re: [CAD_CAM_EDM_DRO] servo motor replacement
Jon Elson
2002-08-16 21:31:34 UTC
Re: [CAD_CAM_EDM_DRO] servo motor replacement
doug98105
2002-08-16 21:57:46 UTC
Re: servo motor replacement