DXF to Gcode converter
Posted by
Mark
on 2002-09-15 12:43:19 UTC
Go to yeagerautomation.com and download ACE Converter.
Works extremely well, very little air time, very good optimization of
the toolpath, and you can specify the total depth plus the incremental
depth per cut.
it's now GPL'd (free), and I ran it on a 3 megabyte file that had
been generated by cybermesh (photo to DXF) the other day - took a while
to convert, but worked well.
/mark
Works extremely well, very little air time, very good optimization of
the toolpath, and you can specify the total depth plus the incremental
depth per cut.
it's now GPL'd (free), and I ran it on a 3 megabyte file that had
been generated by cybermesh (photo to DXF) the other day - took a while
to convert, but worked well.
/mark
Discussion Thread
Mark
2002-09-15 12:43:19 UTC
DXF to Gcode converter
ahlee1010
2002-09-15 13:26:22 UTC
Re: DXF to Gcode converter