CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 1/8 Spindle - Thanks!!!

Posted by Marv Frankel
on 2002-09-19 20:40:51 UTC
Roger,
I have a Foredom flex-shaft grinder with the handpiece you
described. The body is 1" in diameter, and the flex shaft is 3/8". The
handpiece comes with several standard size collets, so it might be an idea
to have a small Jacobs chuck with a 1/4" arbor, to hold those in-between
size drills.

Marv Frankel
Los Angeles

----- Original Message -----
From: "vrsculptor" <vrsculptor@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, September 19, 2002 7:33 PM
Subject: [CAD_CAM_EDM_DRO] 1/8 Spindle - Thanks!!!


> Thanks guys... based on your replies I've decided to buy one of the
> Foredom 1/4 HP flex-shaft spindles with a 1" diameter body. It
> should work fine and I think my spindle has a 1.25" hole all the way
> up. Now... anyone got any ideas how I can reach up 8' to feed the
> cable through the top of the spindle and hang the motor from the
> rafters? Its never been a problem as I have a quick change system
> and don't use a drawbar.... Oh well...
>
> Thanks all,
> Roger
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

vrsculptor 2002-09-19 19:34:03 UTC 1/8 Spindle - Thanks!!! Marv Frankel 2002-09-19 20:40:51 UTC Re: [CAD_CAM_EDM_DRO] 1/8 Spindle - Thanks!!!