RE: [CAD_CAM_EDM_DRO] Confusion...what software to generate G-codes?

Sorry I broke the link to Yeager Automation, it should be
www.yeagerautomation.com/ace.htm , I normally check these before I send the
email but I was in a hurry and forgot to.

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: j.guenther [mailto:j.guenther@...]
> Sent: Friday, October 18, 2002 17:12 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Confusion...what software to generate
> G-codes?
>
>
> You can generate the g-codes from a .dxf file with ACEconverter from
> www.yeagerautomaiton.com/ace.htm or you can also use FlashCUT to generate
> g-code from a .dxf file. You can download the FlashCUT software from
> www.flashcutcnc.com/html/dow.html for the 'demo' version. Either of these
> will convert a .dxf file to g-code that can be run by TurboCNC or Mach1.
>
> John Guenther
> 'Ye Olde Pen Maker'
> Sterling, Virginia
>
> > -----Original Message-----
> > From: mueller914 [mailto:mmueller@...]
> > Sent: Friday, October 18, 2002 16:57 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Confusion...what software to generate
> > G-codes?
> >
> >
> > I'm testing out TurboCNC and Mach1 on my retrofit Shoptask, both of
> > which I thought generated the g-codes from my DXF file. I guess I am
> > wrong and now I am confused as to what software I need.
> >
> > I can generate the DXF's or just about any other file that Pro/E can
> > export, but what do I do with this data?
> >
> > I wish I had to NC Post modual for my Pro/e, but no such luck since
> > work will not pay for my hobbie stuff.
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > as a sister site to the CCED group, as many of the same members
> > are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > EXCEPTIONS........
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

>
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/