CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine?

on 2002-10-25 15:21:36 UTC
How bout that! I have two of the units you are talking about, one vemco and
one k&e, both are 6ft long. I had
pondered the same thing, they would be very easy to make atachments for.
The problem was how to drive them. I finally decided to try 1/16" aircraft
cable and steppers. I don't know how much stretch to anticipate out of 12'
of cable, we'll see how it works.








----- Original Message -----
From: "Carlos Guillermo" <carlos@...>
To: "CAD_CAM_EDM_DRO@egroups. Com" <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 25, 2002 11:17 AM
Subject: [CAD_CAM_EDM_DRO] CNC'd drafting machine?


> Hi All -
>
> Anybody ever CNC a drafting machine? I was clearing out some
> space in the shop and came across an old Vemco drafting machine.
> Looking at the design, it brought to mind the one-sided-drive
> cantilever-beam configuration that was discussed recently. The
> mechanism looks like it would make a nice large capacity 2-axis
> machine for low force applications like hotwire foam-cutting,
> vinyl sign making, cloth marking, plasma cutting, etc. The
> rollers are adjustable and protected, and the rails should have
> pretty good straightness. It might even be possible to hide a
> drive belt on the underside of the rail extrusions. You could
> even take the unit and clamp it onto the workpiece, or mount it on
> the wall. If I only had the time....
>
> Regards,
>
> Carlos Guillermo
> VERVE Engineering & Design
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Carlos Guillermo 2002-10-25 10:19:52 UTC CNC'd drafting machine? Alan Marconett KM6VV 2002-10-25 13:49:20 UTC Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine? Mike Snodgrass 2002-10-25 15:21:36 UTC Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine? Marv Frankel 2002-10-25 22:59:19 UTC Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine? hllrsr@c... 2002-10-26 07:19:11 UTC Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine? William J Blocher 2002-10-26 12:00:23 UTC Re: [CAD_CAM_EDM_DRO] CNC'd drafting machine?