GEM500G CNC photos added
Posted by
allan_reinhard
on 2002-10-30 05:46:08 UTC
Hi Group,
I added photos of the GEM500G 3 axis conversion to the GEM500G Mill
folder. The steppers are 720oz/in with G201 drives, direct drive to
the ballscrews. I made my own double-nut design for the ballnuts.
The main motor is 1.3HP/3PH/220V with a Mitsubishi VFD. Control is
Mach1 on AMD K6-2 450Mhz. Still need to add home switches and oiling
pump.
Future plans are for a 4/5 axis wrist action mount instead of the
trunnion design shown in the CAD images.
Allan
I added photos of the GEM500G 3 axis conversion to the GEM500G Mill
folder. The steppers are 720oz/in with G201 drives, direct drive to
the ballscrews. I made my own double-nut design for the ballnuts.
The main motor is 1.3HP/3PH/220V with a Mitsubishi VFD. Control is
Mach1 on AMD K6-2 450Mhz. Still need to add home switches and oiling
pump.
Future plans are for a 4/5 axis wrist action mount instead of the
trunnion design shown in the CAD images.
Allan