Re: [CAD_CAM_EDM_DRO] emc pinout

On TurboCNC you can change the pinouts easily - in the setup which is saved
in the ini file.

EMC and DANCAD don't have that feature, as near as I can tell. You would
have to get a 'breakout box' to redirect the wiring.

Myron Cherry

----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 02, 2002 8:48 PM
Subject: RE: [CAD_CAM_EDM_DRO] emc pinout


> You can not change the pinout without modifying the source code and
> recompiling. Not for the Linux beginner. The backlash works as well as
> backlash can. No EMC does not read a tach (just wonder what the tach is
> hooked to?). It will give you cutter comp and with the constant
> contouring it can run surfacing programs and such much faster. You may
> want to take a look at Mach1. It is based on the EMC interpreter and has
> most/all/more features and you can easily change the pin-outs. Look at
> www.ArtofCNC.ca
>
> Tim
> [Denver, CO]
> Sherline products at Deep Discount
> www.KTMarketing.com/Sherline
>
> > -----Original Message-----
> >
> >
> > can you change the pinout the board i use has diffrent pinouts (step
> > and direction for x y z axis)also does the backlash comp work good
> > and also does it read a tach i use turbocnc now but as a machinist
> > at work i use cutter comp and turbocnc does not have it and at home i
> > woyld like it on my sherline mill thanks
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
> List Mom List Owner
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>