CAD CAM EDM DRO - Yahoo Group Archive

Re: Cadem

Posted by Dan Mauch
on 1999-05-08 17:17:33 UTC
Most of those software will generate the G code. Then you need a G code
interpreter such as Maxnc, Desknc, CNC pro or supercam. I don't have the
program loaded but that what most of those programs do.
Dan
-----Original Message-----
From: WAnliker@... <WAnliker@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Saturday, May 08, 1999 12:34 PM
Subject: [CAD_CAM_EDM_DRO] Cadem


>From: WAnliker@...
>
>Has anyone on the list any experience with the CADEM software it is free
>online at:
><A HREF="http://www.cadem.com/">CADEM</A> http://www.cadem.com/ And
is
>not crippled or time limited. Works in a Windows system.
>I have downloaded it, has a program for both Lathe and Mill. It looks to
be
>a very complete and powerful program, but I really don't know enough yet to
>really say.
>
>I would hope that someone on the list with more knowledge than I would look
>at it and comment. Does the program output directly to driver boards, or
>does it need an interface of some type to use? Would it be a good program
to
>use with Dan's driver boards? Dan???
>Also does anyone have any good sources of used steppers that they would
like
>to share with the list or me, I need three in the 400 in/ounce class.
>
>thanks,
>Bill
>Alb
>NM
>
>Has anyone on the list converted an EMCO FB-2 mill to CAM?
>
>------------------------------------------------------------------------
>Congratulations to TOWERSHIGH, our latest ONElist of the Week.
>http://www.onelist.com
>Visit our homepage and share with us how ONElist is changing YOUR life!
>------------------------------------------------------------------------
>welcome to CAD/CAM/EDM/DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>

Discussion Thread

WAnliker@x... 1999-05-08 12:33:08 UTC Cadem john@x... 1999-05-08 15:34:39 UTC Re: Cadem Dan Mauch 1999-05-08 17:17:33 UTC Re: Cadem