not ready position
Posted by
Mohammad reza
on 2002-11-08 19:53:24 UTC
hi dear sir :
first things first i must congratulate u for ur useful website .
then i need some help to atart my turning lathe using fanuc 6MB
control unit :
when i start the machine i see the normal ram and bubble tests
display then the display shows not ready display and nothings work
with the machine and the axis normal display hasent been shown .
would u pls tell me whats the matter ?
there is nothing in the maintenance manual to describe
troubleshooting at this problem .
ill be very glad to hear from u as soon
best regards
a.m.esmaeel
first things first i must congratulate u for ur useful website .
then i need some help to atart my turning lathe using fanuc 6MB
control unit :
when i start the machine i see the normal ram and bubble tests
display then the display shows not ready display and nothings work
with the machine and the axis normal display hasent been shown .
would u pls tell me whats the matter ?
there is nothing in the maintenance manual to describe
troubleshooting at this problem .
ill be very glad to hear from u as soon
best regards
a.m.esmaeel