Re: [CAD_CAM_EDM_DRO] Dead zone in stepper power curve

Hi, you have run into stepper madness, sometimes viscous damping or
something simular will help. cul brian f.

----- Original Message -----
From: "tedinoue" <etinoue@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, November 12, 2002 10:19 PM
Subject: [CAD_CAM_EDM_DRO] Dead zone in stepper power curve


> I was wondering if anybody had encountered this problem. I'm
> developing my own stepper controller system and experience the
> following...
>
> when I run a smooth speed ramp, there are certain speeds at which
> the motor doesn't like to run. Not fast speeds, but slow ones. I'm
> running assembly on a microcontroller, and the pulses are very
> accurately timed.
>
> Depending on how I set the winding power (it's a chopper drive), I
> can tune out these dead spots. Usually by decreasing the power.
>
> Do you think this is a resonnance problem? Or is it more likely to
> be a problem with my code?
>
> I've scoped the waveforms and they are uniform and glitch free
> through the problem speed zone.
>
> Any thoughts?
>
> Thanks,
> Ted
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>