Re: [CAD_CAM_EDM_DRO] Need software to transform Point Cloud to Surface
Posted by
Robert Campbell
on 2002-12-07 17:24:27 UTC
Don,
I have been told that Rhino 3.0 should have some enhancements in the area of
point cloud.
I attended a very nice Rhino class Friday evening and all day today. I
learned a lot. We did not get into point cloud.
I will be getting release 3 after they start shipping in January.
You may want to download the beta.
Bob Campbell
I have been told that Rhino 3.0 should have some enhancements in the area of
point cloud.
I attended a very nice Rhino class Friday evening and all day today. I
learned a lot. We did not get into point cloud.
I will be getting release 3 after they start shipping in January.
You may want to download the beta.
Bob Campbell
----- Original Message -----
From: "Donald Kelley" <dkelley@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, December 06, 2002 4:48 AM
Subject: RE: [CAD_CAM_EDM_DRO] Need software to transform Point Cloud to
Surface
> Bob,
> I also would be interested in the procedure on how to
> do this.
> I have Rhino but have only fired it up a few times.
>
> don
>
> -----Original Message-----
> From: Robert Campbell [mailto:bob@...]
> Sent: Thursday, December 05, 2002 11:46 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Need software to transform Point Cloud to
> Surface
>
>
> Matthew,
>
> Check Rhino, I don't know what the limit is.
>
> I will be attending a Rhino class on Saturday, I will ask.
>
> Bob Campbell
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
mjf462001
2002-12-04 19:47:05 UTC
Need software to transform Point Cloud to Surface
Robert Campbell
2002-12-05 08:45:53 UTC
Re: [CAD_CAM_EDM_DRO] Need software to transform Point Cloud to Surface
Robert Campbell
2002-12-07 17:24:27 UTC
Re: [CAD_CAM_EDM_DRO] Need software to transform Point Cloud to Surface