CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] clogging alu...

on 2002-12-14 22:12:36 UTC
Just as a starting point, R.P.M.'s too low, Feedrate too
high, not enough (or the wrong kind of) coolant, too many
flutes on the engraver bit.... Okay, now somebody help with
the really difficult answers!

RayHex

----------
> From: Jens Swales <jipeess2000@...>
>
> hi all
>
> any tips/hints most welcome how to avoid clogged hs
mill-bits
> (engraving alu)
>
> js

Discussion Thread

Jens Swales <jipeess2000@y... 2002-12-14 06:01:01 UTC clogging alu... turbulatordude <davemucha@j... 2002-12-14 09:56:15 UTC Re: clogging alu... Robert Campbell 2002-12-14 10:55:04 UTC Re: [CAD_CAM_EDM_DRO] clogging alu... JanRwl@A... 2002-12-14 18:18:05 UTC Re: [CAD_CAM_EDM_DRO] clogging alu... Raymond Heckert 2002-12-14 22:12:36 UTC Re: [CAD_CAM_EDM_DRO] clogging alu...