CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] BP II duplicator conversion

Posted by Marv Frankel
on 2002-12-31 16:07:27 UTC
Guys,
One of the group recently sent me some photos of his conversion, and
one photo shows the knee being counterbalanced by two 150 lb. gas shocks
from McMaster-Carr. If you'd like to see them, I'll dig it up, and put you
in touch with the guy.

Marv Frankel
Los Angeles

----- Original Message -----
From: "Brian" <ka1bbg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, December 31, 2002 3:46 PM
Subject: Re: [CAD_CAM_EDM_DRO] BP II duplicator conversion


> Hi, well a hefty set of gas shocks can counter weigh a knee.. some one on
> this list is doing that. cul brian f.
> ----- Original Message -----
> From: <rfs@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, December 30, 2002 7:54 PM
> Subject: [CAD_CAM_EDM_DRO] BP II duplicator conversion
>
>
> > Advice please...I have access to a BP series II machine with the x,y,
> > and z axis all driven by hydraulic motors. The motors are controlled
> > by a device I am not familiar with but strikes me as being like a
> > digitizers with a probe. Push the probe in certain directions drives
> > the x/y table and the z axis. All axes have ball screws and nuts.
> > Since this machine is a reasonable buy, would it make a device to
> > retrofit for CNC?? The hydraulic motors are about the same size and
> > position as servo's driven BP mills I have seen. The motors appear
> > to be driving a pulley/belt rather than direct drive. The z axis is
> > the knee of the machine and not the head. I wounder if servo's would
> > be powerful enough to move the knee up and down (I don't believe that
> > the knee has a counter weight system) In place of the machine head
> > is a long slotted plate for mounting multiple machine heads. The
> > hydraulic controller is also mounted to this plate. Any advice would
> > be appreciated. Thanx...Richard in Michigan.
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

k8zre <rfs@c... 2002-12-30 16:54:32 UTC BP II duplicator conversion Jon Elson 2002-12-30 23:15:18 UTC Re: [CAD_CAM_EDM_DRO] BP II duplicator conversion k8zre <rfs@c... 2002-12-31 12:20:05 UTC Re: BP II duplicator conversion Brian 2002-12-31 15:45:36 UTC Re: [CAD_CAM_EDM_DRO] BP II duplicator conversion Marv Frankel 2002-12-31 16:07:27 UTC Re: [CAD_CAM_EDM_DRO] BP II duplicator conversion k8zre <rfs@c... 2002-12-31 19:30:45 UTC Re: BP II duplicator conversion Marv Frankel 2003-01-01 03:00:33 UTC Re: [CAD_CAM_EDM_DRO] Re: BP II duplicator conversion k8zre <rfs@c... 2003-01-01 08:06:54 UTC Re: BP II duplicator conversion motovidia <motovidia@a... 2003-01-01 11:58:52 UTC Re: BP II duplicator conversion