CAD CAM EDM DRO - Yahoo Group Archive

Open Source PIC Stepper Drivers.

Posted by Vince Negrete
on 2003-01-02 09:27:06 UTC
Just in case anyone missed it, here is the links again for some interesting
Stepper Drivers with quite a few features aboard.
(only in Kit Form - Soldering skills needed)
But the best feature of it is you get "Full" PIC source code. Just in case
you want to make any additions / Changes to it in the future.
(I'm sure everyone knows about it but just in case some new people want
variety.)

The Ebay ad ends in 4 days. Anyone interested might want to go check it out.

Note: As I said below I share no financial interest in this.

Vince

----- Original Message -----
From: "Vince Negrete" <vnegrete@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, December 30, 2002 11:43 PM
Subject: Re: [CAD_CAM_EDM_DRO] HOBBYCNC


> Just looked at the site. Interesting. But if you have soldering skills I
> recommend this Stepper Driver board for $30.00. It has many features and
> well supported w/ tutorials, etc... Checkout Ebay Ad: Item # 3103503558
>
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=26209&item=3103503558
>
> or for more info on it:
> http://www.piclist.com/techref/io/stepper/linistep/index.htm
>
> The rest you can get on Ebay, etc as surplus. So you can go cheap until
> you like it enough to get some Geckos and dive in deeper.
>
> Vince
>
> ps. I share no interest in the site above. Just a happy customer.
>
>
> ----- Original Message -----
> From: <kleinrw@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, December 30, 2002 9:23 AM
> Subject: [CAD_CAM_EDM_DRO] HOBBYCNC
>
>
> > I am interested in getting into CNC routing as a hobby and was
> > impressed by the www.hobbycnc.com website. Can anyone give opinion
> > on this setup. I will be routing 1/4" (6mm) plywood boat framing as
> > well as 2-4#/ft^3 closed cell foam. Thanks in advance!
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>

Discussion Thread

Vince Negrete 2003-01-02 09:27:06 UTC Open Source PIC Stepper Drivers.