RE: [CAD_CAM_EDM_DRO] Stepper motor questions (4&6 wire) a little addendum
Posted by
Nigel Bailey
on 2003-01-03 09:11:13 UTC
beware when buying second-hand 4 or 6 wire steppers, they can be 3 phase
ones, ie wire-coil-wire X3, or wire-coil-common X3 (120 degrees out of
phase, instead of the (for us) more useful 90 degrees)
-----Original Message-----
From: fozzyber <jerry@...> [mailto:jerry@...]
Sent: 03 January 2003 16:29
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Stepper motor questions
I have been looking around at/for stepper motors.
I see that there are 4,6,8 wire motors.
Stepperworlds Controller board has connection for 6 wires.
hobbycnc board seems to work with 5,6,8 wires.
Xylotex seems to work with 4 wire.
My question is this, what is the diffrence between a 4,5,6,8 wire
motors? I would asume that each pair of wire would make up a coil
loop inside the motor. And the 4 wire motors have two loops.
and the 8 wire would have 4 loops that you would take the opposing
coil and hook up in reverse to the controler. But I'm am confussed
with 6 wire motors how would you hook these up to a 4 connector board?
If some one could explain the differnce between 4,6,8 wire motors and
how to hook them up to a 4 and 6 connector board it would add to my
understanding.....
Thanks
Jerry
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
ones, ie wire-coil-wire X3, or wire-coil-common X3 (120 degrees out of
phase, instead of the (for us) more useful 90 degrees)
-----Original Message-----
From: fozzyber <jerry@...> [mailto:jerry@...]
Sent: 03 January 2003 16:29
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Stepper motor questions
I have been looking around at/for stepper motors.
I see that there are 4,6,8 wire motors.
Stepperworlds Controller board has connection for 6 wires.
hobbycnc board seems to work with 5,6,8 wires.
Xylotex seems to work with 4 wire.
My question is this, what is the diffrence between a 4,5,6,8 wire
motors? I would asume that each pair of wire would make up a coil
loop inside the motor. And the 4 wire motors have two loops.
and the 8 wire would have 4 loops that you would take the opposing
coil and hook up in reverse to the controler. But I'm am confussed
with 6 wire motors how would you hook these up to a 4 connector board?
If some one could explain the differnce between 4,6,8 wire motors and
how to hook them up to a 4 and 6 connector board it would add to my
understanding.....
Thanks
Jerry
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
fozzyber <jerry@o...
2003-01-03 08:28:59 UTC
Stepper motor questions
Nigel Bailey
2003-01-03 09:11:13 UTC
RE: [CAD_CAM_EDM_DRO] Stepper motor questions (4&6 wire) a little addendum
Nigel Bailey
2003-01-03 09:11:13 UTC
RE: [CAD_CAM_EDM_DRO] Stepper motor questions (4,6,8 wire motors)
fozzyber <jerry@o...
2003-01-03 10:03:53 UTC
Re: Stepper motor questions (4,6,8 wire motors)
JanRwl@A...
2003-01-03 20:23:45 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motor questions
JanRwl@A...
2003-01-03 20:28:47 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motor questions
grantfair2001
2003-08-17 00:47:53 UTC
Stepper motor questions
Harvey White
2003-08-17 08:02:53 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motor questions
Antonius J.M. Groothuizen
2003-08-17 09:17:42 UTC
Re: Stepper motor questions