Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Posted by
Doug Fortune
on 2003-01-04 19:35:43 UTC
jim davies wrote:
with.... as I mentioned you want the 40KHz autoranging version.
Thus the circuit measures and displays counts/second which
equals revs/sec if there is one count/rev.
If you want rpm, I guess you have to multiply by 60 in your
head (ie a display of 50 indicates 3000 rpm).
However, I've contacted Frank (the manufacturer in Australia)
before, he is very accomodating. I'll ask if he wants to put
together a 'rpm display' version vs the available 'rps display'.
regards
Doug Fortune
http://www.cncKITS.com
.
>The above circuit card has 5 'personalities' it can be ordered
> > Here is a 4 digit LED (0-9999 rpm) tachometer kit
> > for CAN$20 (about $13 US):
> >
> > http://www.qkits.com/serv/qkits/diy/pages/QK148.asp 40Khz autoranging
> option
> >
> maybe I'm missing something. How does this become a tach?
with.... as I mentioned you want the 40KHz autoranging version.
Thus the circuit measures and displays counts/second which
equals revs/sec if there is one count/rev.
If you want rpm, I guess you have to multiply by 60 in your
head (ie a display of 50 indicates 3000 rpm).
However, I've contacted Frank (the manufacturer in Australia)
before, he is very accomodating. I'll ask if he wants to put
together a 'rpm display' version vs the available 'rps display'.
regards
Doug Fortune
http://www.cncKITS.com
.
Discussion Thread
Doug Fortune
2003-01-04 17:55:54 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
jim davies
2003-01-04 19:17:27 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Doug Fortune
2003-01-04 19:35:43 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
jim davies
2003-01-04 20:54:37 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Tony Jeffree
2003-01-04 23:55:28 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Doug Fortune
2003-01-05 00:57:21 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Tony Jeffree
2003-01-06 09:00:03 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
Hans Wedemeyer
2003-01-06 09:03:45 UTC
Re: [CAD_CAM_EDM_DRO] r.p.m. kit??? / 4 digit under $20
deanc500 <deancouillard@s...
2003-01-06 14:25:47 UTC
Cheap tach - was r.p.m. kit??? / 4 digit under $20
Hans Wedemeyer
2003-01-06 14:41:36 UTC
Re: [CAD_CAM_EDM_DRO] Cheap tach - was r.p.m. kit??? / 4 digit under $20
turbulatordude <davemucha@j...
2003-01-06 15:20:45 UTC
Re: Cheap tach - was r.p.m. kit??? / 4 digit under $20
deanc500 <deancouillard@s...
2003-01-06 15:51:58 UTC
Re: Cheap tach - was r.p.m. kit??? / 4 digit under $20
Paul Amaranth
2003-01-06 17:50:52 UTC
Re: [CAD_CAM_EDM_DRO] Cheap tach - was r.p.m. kit??? / 4 digit under $20