Missing Fonts In Autocad
Posted by
Dan DeArmond <dearmond@a...
on 2003-01-20 00:14:57 UTC
Fonts in AutoCad must be made into poly lines for the MAXNC software
to recognize them. This isn't always easy to do with some fonts.
A much easier way is to use RAMS Software which allows the use of any
font, dxf, stl, Rhino 3dm, AI, Eps, iges & etc. Corel works easy this
way too. Even "V" cutting is supported. Look at http://www.rams3d.com
for examples. RAMS is a CAM software only. You will still need a CAD
program. Autocad is fine....turbocad, Iron Cad, Corel Draw,
Mechanical Desktop.... Most any CAD program will work quite easily.
RAMS supports 4th axis indexing & continuous and works very well.
This
is used by sign makers, jewelers and many machine shops. Good Luck.
to recognize them. This isn't always easy to do with some fonts.
A much easier way is to use RAMS Software which allows the use of any
font, dxf, stl, Rhino 3dm, AI, Eps, iges & etc. Corel works easy this
way too. Even "V" cutting is supported. Look at http://www.rams3d.com
for examples. RAMS is a CAM software only. You will still need a CAD
program. Autocad is fine....turbocad, Iron Cad, Corel Draw,
Mechanical Desktop.... Most any CAD program will work quite easily.
RAMS supports 4th axis indexing & continuous and works very well.
This
is used by sign makers, jewelers and many machine shops. Good Luck.