Re: Intellico Stepper Drives:
Posted by
WUKSTA <gerry@z...
on 2003-02-02 19:47:00 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Rich Goldner
<rgoldner@i...>" <rgoldner@i...> wrote:
Thanks for the reply but these are not the same drives.
Per the data I have these drives include the "driver,translator &
indexer" for the Nema 42 stepper motors. These units can be
programed with a "Computer Terminal" (software required, which
I don't have.) or a "Data Terminal" via an RS-232 port. According
to the guy I got these from, they are about 10 to 15 years old.
These units were also called "Intellimotors".
Thanks;
Gerry
<rgoldner@i...>" <rgoldner@i...> wrote:
> Here's info and a downloadable manual on the drives (hopefully thisRich:
> info is about your drives).
>
> http://www.seoho.com/products/dc42.html
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "WUKSTA <gerry@z...>"
> <gerry@z...> wrote:
> > I came across 4 Intellico DC-42A stepper drives &
> > 4 Bodine Nema 42 4 wire stepper motors. The motors are
> > rated at 3.6 Volts 6.1 Amps.
> > Does anyone know anything about these drives? I have the
> > manuals but no software. Intellico Inc. was located in Buffalo
> > Grove,Ill. They must be out of busness.
> > Thanks;
> > Gerry
Thanks for the reply but these are not the same drives.
Per the data I have these drives include the "driver,translator &
indexer" for the Nema 42 stepper motors. These units can be
programed with a "Computer Terminal" (software required, which
I don't have.) or a "Data Terminal" via an RS-232 port. According
to the guy I got these from, they are about 10 to 15 years old.
These units were also called "Intellimotors".
Thanks;
Gerry
Discussion Thread
WUKSTA <gerry@z...
2003-02-02 04:47:25 UTC
Intellico Stepper Drives:
Rich Goldner <rgoldner@i...
2003-02-02 18:34:17 UTC
Re: Intellico Stepper Drives:
WUKSTA <gerry@z...
2003-02-02 19:47:00 UTC
Re: Intellico Stepper Drives: