CAD CAM EDM DRO - Yahoo Group Archive

Re: do i need a large capacitor?

on 2003-02-03 20:00:44 UTC
Marv, I live in Canada. I bought the supply from Sayal electronics
here in Toronto. Here is the web site www.sayal.com. Just do a
search for lin psu.
It was not cheap though. It cost about $90.00 US dollars but it's
new and has a warranty. I went for the 28 V just for that little
more go. It is made from Hammond the model is GFOF-4-28.



Les




--- In CAD_CAM_EDM_DRO@yahoogroups.com, Marv Frankel
<dcdziner@p...> wrote:
> Les,
> I'm putting together almost the same system. Would you tell
me where
> your power supply came from?
>
> Marv Frankel
> Los Angeles
>
> ----- Original Message -----
> From: <lum_l@r...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, February 03, 2003 6:48 PM
> Subject: [CAD_CAM_EDM_DRO] do i need a large capacitor?
>
>
> > Hi All,
> >
> > I am finally getting all my pieces together. I have a Xylotex
driver
> > board, powermax II steppers, and a 28V 6A linear power
supply.
> >
> > There are two 10 000uF/50V caps in parallel in the power
supply.
> > Do I require another cap because I plan to run the system at
28
> > volts, which is close to the 35V max for the Xylotex.
> >
> > Thanks in advnce,
> >
> > Les
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe:
CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner:
CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I
consider this to be a
> sister site to the CCED group, as many of the same members
are there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >

Discussion Thread

lum_l <lum_l@r... 2003-02-03 18:49:07 UTC do i need a large capacitor? Marv Frankel 2003-02-03 19:39:13 UTC Re: [CAD_CAM_EDM_DRO] do i need a large capacitor? lum_l <lum_l@r... 2003-02-03 20:00:44 UTC Re: do i need a large capacitor?