Re: [CAD_CAM_EDM_DRO] Poor Man's Router Again !

What type of head did you use for your router. I'm getting the piece
together now for mine and your seems about the same size I'm building. I
just can't figure what type of motor/router head to use. I would like to be
able to cut at depths over 10" vertically and a plain router don't think
could do it without striking the router base.

Thanks,

Barclay

----- Original Message -----
From: <dakota8833@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 12, 2003 9:02 PM
Subject: [CAD_CAM_EDM_DRO] Poor Man's Router Again !


> I uploaded a few new picts
> http://photos.groups.yahoo.com/group/CAD_CAM_EMC/lst CNC Router....
> note how I managed running the wiring without using costly cable
> chain.
>
> Check out the size of the transformer in my PS. Found this Power
> Supply at the scrap yard for 15 bucks ( weighed 104 lbs ). Had 8 6500
> 75 v and
> 3 12000 75 v caps. The trans outputs 33.5v through the rectifier at 45
> amps ,... with the caps hooked up I'm seeing 49.5 volts.
>
> Frank
>
> FRP Enterprise
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>