Re: [CAD_CAM_EDM_DRO] VisualMill Generating Extra G-code/Cuts???

You were right, here is the codec to view
http://www.techsmith.com/products/studio/codecdownload.asp

thanks

----- Original Message -----
From: "Scott A. Stephens" <sstephenssprint020@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 15, 2003 7:08 PM
Subject: Re: [CAD_CAM_EDM_DRO] VisualMill Generating Extra G-code/Cuts???


> What did you use to generate the AVI??? None of my viewers would
> open it.
> At 03:03 PM 3/15/2003 -0600, you wrote:
> >I've made two simple models in Rhino and imported both into Demo version
> >of Visual Mill and the Free version both with the same results. It is
> >cutting extra depth on the Z-axis. I have a 1inch thick model with .25
> >cutout throughout and when it generates the toolpath it cuts extra ~.75
in
> >certain spots. The first was just a simple rectangular cutout and it cut
> >through, then I created this one and it cut some of it fine then the rest
> >when complete z-depth. Here is a simple video of the toolpath simulation
> >in visual mill and you can see the obvious extra cut
> >www.fusionxstudio.com/movie/cnc2.avi Should I use a different program to
> >produce the g-code, am I using the wrong processor-"general" I've posted
> >that question earlier and in the visual mill group but I'm the only post
> >in a few days in that group. Any help would be appreciated. I've
finally
> >finished my first machine and I'm ready to start playing.
> >
> >Thanks,
> >
> >Barclay
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> >timg@...
> >Moderator: pentam@... indigo_red@... [Moderators]
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects
> >goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> >reach it if you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> >sister site to the CCED group, as many of the same members are there, for
> >OT subjects, that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> >THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >bill
> >List Mom
> >List Owner
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>