RE: [CAD_CAM_EDM_DRO] Sanyo-Denki Step-Syn Type 103-771-18 Stepping Motor

They are likely not well suited to machine tool use at all. At 24 V they
are a high inductance motor. This will severly limit the maximum
feedrate you can achieve. Normally for machine tool use you want a motor
that is under 5 v and 2 - 3 v is prefered.

Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
Now selling Visual Mill 4.0 Special at $1200

> -----Original Message-----
>
>
> Does anyone of any information on this type of stepping
> motor, Sanyo- Denki Step-Syn Type 103-771-18 Stepping Motor.
> I am starting a CNC
> project as a first timer and would like to know if this motor would
> work on a Sherline 5000 mill. I have 3 of them and I already know
> that they will fit. I already know that they are 24V, .18A, and 1.8
> degree/step. Will it have enough torque for this application or
> would they be better suited for something smaller, such as a pin
> router controlled by CNC.
>
> Thank You
>
> Victor A. Estes
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html