Re: [CAD_CAM_EDM_DRO] HELP NEEDED

Gene,

Do you know if they were wired up in parallel (4 wire)? What is the rating
of the drivers?

If you look at the electrosales web page www.electrosales.com. and look
under Warner electric. you will find a list of the current stepper motors.

You may be able to make a match. I would expect that they were about 350
oz/in if they were in bipolar mode.

Bob Campbell

----- Original Message -----
From: "capteod" <mfgguru@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, March 24, 2003 3:04 PM
Subject: [CAD_CAM_EDM_DRO] HELP NEEDED


> I need help in determining the torque of the motors on an EMCO F-1
> CNC MILL. These units use older SLO-SYN Stepper motors, which are
> single stack units with 8 leads. I have a machine with the stepper
> motors burned out and want to replace them. The original MOTORS are
> marked, SLO-SYN SM-072-0062-DS the label also indicated the
> following: 4.6 Ohm / Phase 2 Amps / Phase.
>
> No one can tell me the specification as to inch / oz requirements.
> I cannot get SLO-SYN to respond, thier answer is that the motor was
> manufactured as a custome motor and they cannot release any
> information.
>
> Thanks to all of you in advance.
>
>
> Gene
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>