Re: [CAD_CAM_EDM_DRO] G320 Fault

Jason Cox wrote:

>
> Jon,
>
> Thanks for your reply. I have powered down and have had the drive completely
> disconnected, still when I hook it back up the fault light stays on.
>
> Any other suggestions?
>
> Thanks,
>
> Jason.
>

Do you have an encoder hooked up to it? If not it cannot create the
servo error it thinks it needs to hold position and will fault out. Look
near the bottom of the first page of the installation notes that came
with it, Testing The Encoder. Ed.