Hot-wire CNC Foam Cutters
Posted by
johncrad
on 2003-04-07 01:03:14 UTC
Hello all,
Can an expert please advise what size stepper motors are generally
used on 4 axis CNC foam cutters. Looking at the photos and jpegs,
they seem to be pretty small. Some are can types. Probably no more
than 15 to 20 oz-in hold torque and max speed seems to be about 4"
per minute. Would these numbers be right.
TIA
John Craddock
Can an expert please advise what size stepper motors are generally
used on 4 axis CNC foam cutters. Looking at the photos and jpegs,
they seem to be pretty small. Some are can types. Probably no more
than 15 to 20 oz-in hold torque and max speed seems to be about 4"
per minute. Would these numbers be right.
TIA
John Craddock
Discussion Thread
johncrad
2003-04-07 01:03:14 UTC
Hot-wire CNC Foam Cutters
aerowright
2003-04-07 19:49:06 UTC
Re: Hot-wire CNC Foam Cutters
John Craddock
2003-04-07 21:30:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hot-wire CNC Foam Cutters
Alan Marconett KM6VV
2003-04-07 21:37:01 UTC
Re: [CAD_CAM_EDM_DRO] Hot-wire CNC Foam Cutters