Recommendations for a fully assembled and tested controller
Posted by
rcbird123
on 2003-04-11 15:21:03 UTC
Hello, I am looking for recommendations regarding a person or
company that can provide a fully assembled and tested controller for
my Mill/Drill machine. I am looking at 36V-50V/25A 50A power supply
that can power 600+ ounce servo motors.
My Mill/Drill is an off-shore model and the details of the machine
are as follows:
1HP 220V R8
Features
Head swivels 360o / Fine downfeed - calibrated /12 Speeds /Zero
setting dial / Positive spindle lock /H.D. tapered roller bearings /
Adjustable gibs on table / Adjustable table stops / Specifications /
Drilling capacity 1 1/4" / Face mill 3" / End mill capacity 3/4" /
Swing 16 15/16' 15 7/8" Max. distance spindle to table 15
9/16" /Spindle taper R8 Spindle stroke 4 5/16" /Diameter of column 3
3/4" /Motor 1 HP - 110V
Spindle speed 12 (110-2580 RPM) / Working area of table 7 1/2" x 26'
Table travel 7 1/2' x 19 3/4" " / Weight 200kg.
Any help would be appreciated.
Thanks
Norman
company that can provide a fully assembled and tested controller for
my Mill/Drill machine. I am looking at 36V-50V/25A 50A power supply
that can power 600+ ounce servo motors.
My Mill/Drill is an off-shore model and the details of the machine
are as follows:
1HP 220V R8
Features
Head swivels 360o / Fine downfeed - calibrated /12 Speeds /Zero
setting dial / Positive spindle lock /H.D. tapered roller bearings /
Adjustable gibs on table / Adjustable table stops / Specifications /
Drilling capacity 1 1/4" / Face mill 3" / End mill capacity 3/4" /
Swing 16 15/16' 15 7/8" Max. distance spindle to table 15
9/16" /Spindle taper R8 Spindle stroke 4 5/16" /Diameter of column 3
3/4" /Motor 1 HP - 110V
Spindle speed 12 (110-2580 RPM) / Working area of table 7 1/2" x 26'
Table travel 7 1/2' x 19 3/4" " / Weight 200kg.
Any help would be appreciated.
Thanks
Norman
Discussion Thread
rcbird123
2003-04-11 15:21:03 UTC
Recommendations for a fully assembled and tested controller
kdoney_63021
2003-04-11 18:29:51 UTC
Re: Recommendations for a fully assembled and tested controller