Re: [CAD_CAM_EDM_DRO] EMC minimill option/Parallel port issues

Hi Paul,

Have a look at:-

http://www.southwest.com.au/~jfuller/sio.html
and
http://www.dage.net/parport.html

These are the circuits I based my test board on.

Ian

--
Ian W. Wright
Sheffield UK

----- Original Message -----
From: Paul Devey <paul_devey@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: 03 March 2000 20:01
Subject: Re: [CAD_CAM_EDM_DRO] EMC minimill option/Parallel port issues


> From: "Paul Devey" <paul_devey@...>
>
> Ian,
>
> Do you have a schematic that you can share with us?
>
> Paul
>
> > I haven't heard of one of these, but I use a home-built board which is
> > simply a handful of LEDs hooked up to a ULN2003 driver chip which plugs
> into