CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Step & Direction Source

Posted by res0clvs
on 2003-05-07 10:44:17 UTC
Danial J. Statman:
Thanks... I have TurboCNC, now all I have to do is figure how I can get 40
pulses per second.

Robert williams

----- Original Message -----
From: "Statman Designs, LLC" <titanium@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, May 07, 2003 10:08 AM
Subject: Re: [CAD_CAM_EDM_DRO] Step & Direction Source


> A computer with a controller program installed and running that can output
> step and direction signals through the parallel port. there are other
> options, but this one is very easy to implement. You can download a free
> and fully functional copy of TurboCNC (search the web for it) and it will
do
> what you want to get started.
>
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
> dan.statman@...

Discussion Thread

res0clvs 2003-05-07 09:25:36 UTC Step & Direction Source Statman Designs, LLC 2003-05-07 10:09:52 UTC Re: [CAD_CAM_EDM_DRO] Step & Direction Source Jon Elson 2003-05-07 10:44:14 UTC Re: [CAD_CAM_EDM_DRO] Step & Direction Source res0clvs 2003-05-07 10:44:17 UTC Re: [CAD_CAM_EDM_DRO] Step & Direction Source res0clvs 2003-05-07 11:50:43 UTC Re: [CAD_CAM_EDM_DRO] Step & Direction Source Dave Lantz 2003-05-07 15:11:29 UTC RE: [CAD_CAM_EDM_DRO] Step & Direction Source res0clvs 2003-05-07 17:43:26 UTC Re: [CAD_CAM_EDM_DRO] Step & Direction Source