Re: [CAD_CAM_EDM_DRO] Another transformer question

On Wed, 07 May 2003 10:05:29 -0500, you wrote:

>
>
>Tony Jeffree wrote:
>
>>The important thing is that the phase of the outputs match; if you reverse
>>the primary connections on one transformer, they will no longer have their
>>outputs in phase with each other (bad news!).
>>
>A quick and safe way to connect the outputs of two transformers while
>checking "phase", is to connect the outputs together with a 5amp agc
>fuse before making a final connection. If not in phase, the fuse goes up
>like toast immediately. If they are in phase, you will not blow the
>fuses, and be able to check the output with a meter.
>
>Once you have the phases I.D.'d, connect the legs without the fuses.

A voltmeter is more useful than a fuse...

Harvey

>
>Chris L
>
>>
>>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>