Allegro 3967 chip driver board
Posted by
Charles Knight
on 2003-06-01 19:19:45 UTC
>Well, I had the thought that I might be able to take the outputs, and
>
>I double checked Allegro's site.
>
>these are limited to tiny steppers with a current draw of 750 mA.
>
use them to drive some transistors...multi stage, if you will forgive
the rather crude description. The output is, after all, defined by the
load supply...up to 30V, but 5V would provide just the right signals for
a transistorized second stage.
Would this work, or am I just barking up the wrong tree? Basically I
want to use it as a stepper translator only.
-- Chuck Knight
Discussion Thread
Charles Knight
2003-06-01 19:19:45 UTC
Allegro 3967 chip driver board
caudlet
2003-06-01 20:10:38 UTC
Re: Allegro 3967 chip driver board
turbulatordude
2003-06-02 05:39:45 UTC
Re: Allegro 3967 chip driver board