RE: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.
Posted by
Quale, Robert
on 2003-07-28 06:25:03 UTC
Thanks for the reply!
The servos are on a Bridgeport. The name plate rates it at 147V at 12.7
Amp. I picked the 15Amp just because it was an even Number. I might try
the Rutex analog driver if I can get amps reasonably. Thanks
Bob
The servos are on a Bridgeport. The name plate rates it at 147V at 12.7
Amp. I picked the 15Amp just because it was an even Number. I might try
the Rutex analog driver if I can get amps reasonably. Thanks
Bob
Discussion Thread
Quale, Robert
2003-07-27 12:09:18 UTC
RE: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.
Jon Elson
2003-07-27 19:43:46 UTC
Re: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.
Quale, Robert
2003-07-28 06:25:03 UTC
RE: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.
Denis Russo
2003-07-28 20:33:38 UTC
Re: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.
Tim Goldstein
2003-07-28 21:12:34 UTC
RE: [CAD_CAM_EDM_DRO] Servo drivers for step and direction.