CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC Servo Building...

Posted by Bill Kichman
on 2003-08-08 07:35:40 UTC
That's all there is to it...a dc motor and a rotary encoder. My 2 larger
1/4hp servos are just that. I added a rotary encoder to the rear of the
motor to replace the older resolver and it works great.

R. William Kichman, P.E.
Kichman Engineering Associates
103 Old Furnace Road
Cornwall, PA 17016-0643
tel/fax 717/270-0714
----- Original Message -----
From: "srg1232003" <srg1232003@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, August 08, 2003 7:46 AM
Subject: [CAD_CAM_EDM_DRO] CNC Servo Building...


> Hello,
>
> I was just wondering what would be required to build a servo for CNC
> use?
>
> Would I be right in guessing that a DC motor and some kind optical
> encoder is all that is required?
>
> Is it possible to build a servo to be used with a commercial driver
> such as a gecko?
>
> Thanks
> Steve.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

srg1232003 2003-08-08 06:16:22 UTC CNC Servo Building... Bill Kichman 2003-08-08 07:35:40 UTC Re: [CAD_CAM_EDM_DRO] CNC Servo Building... Jon Elson 2003-08-08 10:39:02 UTC Re: [CAD_CAM_EDM_DRO] CNC Servo Building...