CAD CAM EDM DRO - Yahoo Group Archive

Re: Joining Encoder Wires?

on 2003-08-14 20:01:35 UTC
Mark

I try use hemostats as heat sinks whenever I solder two wires
together. It protects the components, and prevents wicking on multi-
strand cables. You can use any small clamps for this - I've pressed
my wife or daughter into service to hold needle-nose pliers in
position.

Alternatively, you can use a crimp or clamp connector.


Tony



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "mmurray701" <gmurray@n...>
wrote:
> Just wondering the best mothod of joining longer wires onto the
tiny
> ones that come from the encoder. I'm a little nervous of an encoder
> connection failure and just want to make sure is done right. Please
> advise. Thanks.
>
> Mark

Discussion Thread

mmurray701 2003-08-14 11:05:23 UTC Joining Encoder Wires? Antonius J.M. Groothuizen 2003-08-14 20:01:35 UTC Re: Joining Encoder Wires? Jon Elson 2003-08-14 22:23:48 UTC Re: [CAD_CAM_EDM_DRO] Joining Encoder Wires? mmurray701 2003-08-15 20:36:40 UTC Re: Joining Encoder Wires?