Re: [CAD_CAM_EDM_DRO] HF spindle sources

Have a look at Paul Jones site www.cnconabudget.com ..cul brian f.

----- Original Message -----
From: "Graham Stabler" <eexgs@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, September 03, 2003 4:36 AM
Subject: [CAD_CAM_EDM_DRO] HF spindle sources


>
> I have a smallish (6") precision XY stage from Parker Daedal and have
> just got a Z axis sorted for it. It should be pretty accurate and I
> intend to use it for some engraving and the manufacture of very small
> parts.
>
> What it does need is a decent high speed spindle. There is no point
> sticking a Dremel on it.
>
> Does anyone know of any HF spindles that will not absolutely break
> the bank? It doesn't need to be excessively large.
>
> Thanks
>
> Graham
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>