Re: Powersupply

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Brian Fairey <bfairey@r...>
wrote:

> What do you reccomend as a PS to drive 3 - 201's and
> 2 steppers NEMA 40, 2.5v, 4.5A, 2.8mH, 2200mNm, 1.8deg
> and another motor at a lesser rating.
> Basically I am replacing a AHHA system but can I use the AHHA

software

> and what do I do about the AHHA IFB board.
> Thanks
> Brian.

www.MPJA.com, 24VAC 10A transformer, should yield about 37 volts @ 10
amps. A little low on the max voltage, but a good price.

more than enough current and for around $25.00 for the xfrmr and
shipping it's a good deal.


Dave