Re: [CAD_CAM_EDM_DRO] thanks
Posted by
Jim Geib
on 2000-03-24 19:25:36 UTC
Joe
Is that cable solid wire, most cat 5 plenum is. If so you may run into a
problem with the wires breaking if motors are mtg. on moving tables. I work
with cat 5 network cable everyday and use only strand cat 5 for wall to
computer patch cables.
Jim Geib
Mansfield, Ohio
Is that cable solid wire, most cat 5 plenum is. If so you may run into a
problem with the wires breaking if motors are mtg. on moving tables. I work
with cat 5 network cable everyday and use only strand cat 5 for wall to
computer patch cables.
Jim Geib
Mansfield, Ohio
----- Original Message -----
From: "Joe Vicars" <jvicars@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Friday, March 24, 2000 5:13 PM
Subject: [CAD_CAM_EDM_DRO] thanks
> From: Joe Vicars <jvicars@...>
>
> Thanks for the help on the plenum cable, gonna hook it up this weekend.
>
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 0.0%
> Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
> http://click.egroups.com/1/937/2/_/423600/_/953932022/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>