Re: Enclosures and Power supplies

Hello,

As has been mentioned here recently, an LM317 regulator can work at
these voltages...

And I've mentioned a few times doing a two-step process using a 7824
or first (running a fan from it perhaps), and feeding the 24 into the
7805...

Hope this helps,

Ballendo

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Harvey White <madyn@i...>
wrote:
<snip> The 30 volt supplies will be ok for the motors, voltage wise,
but a

> bit high for the 5 volt regulators, which would prefer about 8 to

12.

>
>