Re: [CAD_CAM_EDM_DRO] source for small variable speed motors?

Try this,

http://www.aaaim.com/CandH/index.htm

Steve

----------
From: Elliot Burke <elliot@...>
To: CAD_CAM_EDM_DRO@...
Subject: [CAD_CAM_EDM_DRO] source for small variable speed motors?
Date: Monday, March 27, 2000 6:57 AM

From: "Elliot Burke" <elliot@...>

Does anyone know a cheap source for small variable speed motors?
In particular 1/10 to 1/4 hp, preferably geared to less than 1000 rpm.
These can be DC motors, I'll put a speed control on.

I thought of using a drill motor, but don't know how reliable these would
be.

Am making a polishing machine.

Elliot Burke


------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 0.0%
Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
http://click.egroups.com/1/937/2/_/423600/_/954169056/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager