CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Testing servos

Posted by Dan Mauch
on 2003-10-20 06:46:24 UTC
One other vital test on a PMDC motor is to connect a multimeter to one
of the wires/terminals. Set the meter to read continuity, then check to
the motor frame that there is an open circuit. Then check the other lead
to the motor frame. Both should read open. The reason for this is some
so called servo motors have one of their leads connected to the motor
frame.
Dan

Discussion Thread

GRautoHP@a... 2003-10-18 10:50:34 UTC Testing servos caudlet 2003-10-18 16:24:11 UTC Re: Testing servos balsaman_cnc 2003-10-18 22:45:38 UTC Re: Testing servos Jon Elson 2003-10-18 22:58:57 UTC Re: [CAD_CAM_EDM_DRO] Testing servos bitnick78 2003-10-19 14:03:59 UTC Re: Testing servos Jon Elson 2003-10-19 22:19:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Testing servos Dan Mauch 2003-10-20 06:46:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Testing servos