Parker Digiplan Stepper Drive, Help Wanted
Posted by
bear_cnc
on 2003-10-28 02:57:24 UTC
Dear All,
I am having trouble with an old Parker PKS Digiplan Stepper Motor
Driver, Model CD20. There is a fault on the main board causing one of
the output H switches to overheat.
Parker were not very helpful in that they do not make wiring diagrams
available to anyone, not even for this 20 year old unit.
Does anybody have additional faultfinding documents for this unit (I
do have the user manual, which is useless for this purpose).
Alternatively, does anyone have such a drive going spare? Or even an
alternative unit? Must be step/direction input, 3 Amps per phase, and
be able to handle a 64 Volts motor supply.
Any help appreciated.
Kind regards,
Thomas.
I am having trouble with an old Parker PKS Digiplan Stepper Motor
Driver, Model CD20. There is a fault on the main board causing one of
the output H switches to overheat.
Parker were not very helpful in that they do not make wiring diagrams
available to anyone, not even for this 20 year old unit.
Does anybody have additional faultfinding documents for this unit (I
do have the user manual, which is useless for this purpose).
Alternatively, does anyone have such a drive going spare? Or even an
alternative unit? Must be step/direction input, 3 Amps per phase, and
be able to handle a 64 Volts motor supply.
Any help appreciated.
Kind regards,
Thomas.
Discussion Thread
bear_cnc
2003-10-28 02:57:24 UTC
Parker Digiplan Stepper Drive, Help Wanted
rotarysmp
2003-10-28 03:09:05 UTC
Re: Parker Digiplan Stepper Drive, Help Wanted
Terry Owens
2003-11-09 13:03:55 UTC
Re: [CAD_CAM_EDM_DRO] Parker Digiplan Stepper Drive, Help Wanted
John Johnson
2003-11-09 15:09:01 UTC
Re: [CAD_CAM_EDM_DRO] Parker Digiplan Stepper Drive, Help Wanted
Terry Owens
2003-11-10 13:11:02 UTC
Re: [CAD_CAM_EDM_DRO] Parker Digiplan Stepper Drive, Help Wanted