CAD CAM EDM DRO - Yahoo Group Archive

Re:Homemade Circuit Board and Software

Posted by dex367
on 2003-10-29 23:22:01 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Andrew Werby" <a.werby@c...>
wrote:
>> [That sounds pretty impressive, Dex. Are you an electronics
technician in
> real life?]
>

I design motor controllers for automotive applications.


>> [Logs don't usually make great carving material, since they have
an innate
> tendency to split from the inside outward. If a cylindrical shape
is wanted,
> you might be better off quartering a log, drying the quarters
separately,
> then gluing it back together before carving. For 4-axis CAM on
sculptural
> shapes, you might look at DeskProto, which has very good 4th axis
capability
> and is also simple to use. You can download a working copy from
> www.deskproto.com that's good for 30 days.]
>
> Andrew Werby
> www.computersculpture.com


I have some friends that own a kiln. They have sucessfully dried
logs for the chain saw carving group. It dose take a while though.

Dex

Discussion Thread

dex367 2003-10-29 07:26:46 UTC Homemade Circuit Board and Software Andrew Werby 2003-10-29 10:43:03 UTC Re:Homemade Circuit Board and Software robgrzesek 2003-10-29 10:55:47 UTC Re:Homemade Circuit Board and Software dex367 2003-10-29 23:22:01 UTC Re:Homemade Circuit Board and Software Doug Fortune 2003-10-31 07:50:12 UTC Re: [CAD_CAM_EDM_DRO] Homemade Circuit Board and Software