Re: [CAD_CAM_EDM_DRO] xyz kits for drilling printed circuit boards

Thanks I'll check it out, sounds a bit small though.
Jim

----- Original Message -----
From: Doug Fortune <pentam@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Saturday, April 01, 2000 1:06 PM
Subject: [CAD_CAM_EDM_DRO] xyz kits for drilling printed circuit boards


> James Cullins wrote:
>
> > I am new to the list, and to the CNC hobby. I am building an xyz router
for
> > doing PCBs and need a source for #23 stepper motors 100 oz-in.
>
> Have you seen Milford Instruments PCB drilling kit? About 6"x5"x4"
working volume:
> http://www.milinst.demon.co.uk/drilpage.htm
>
> You can buy the kit with the wood parts, or just the electronics and
> cut the MDF yourself on a table saw.
>
> Doug
>
>
>
>
> ------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> Apply NOW!
> http://click.egroups.com/1/975/2/_/423600/_/954616223/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>