Re: [CAD_CAM_EDM_DRO] Percentage Spindle Power meters
Posted by
Maddock Machine
on 2003-11-11 13:09:43 UTC
Hi all
The load meter is more than cool to watch. If you keep a weather eye on the
meter in the first run of a program, it is sometimes possible to catch an
error by detecting a spike in load. And if you are fast enough hit the feed
hold or e-stop to help mininize damage.
Another use is to monitor incert condition. If loads are noted at first run
and then monitored during production a worn incert can be detected before it
fails completely taking the holder with it. This does happen.
Happy watching T.
The load meter is more than cool to watch. If you keep a weather eye on the
meter in the first run of a program, it is sometimes possible to catch an
error by detecting a spike in load. And if you are fast enough hit the feed
hold or e-stop to help mininize damage.
Another use is to monitor incert condition. If loads are noted at first run
and then monitored during production a worn incert can be detected before it
fails completely taking the holder with it. This does happen.
Happy watching T.
Discussion Thread
Jon Elson
2003-11-10 22:25:23 UTC
Re: [CAD_CAM_EDM_DRO] Percentage Spindle Power meters
Tim Goldstein
2003-11-10 22:46:19 UTC
RE: [CAD_CAM_EDM_DRO] Percentage Spindle Power meters
Denis Casserly
2003-11-11 07:13:43 UTC
software sale
washcomp
2003-11-11 11:53:04 UTC
Re: Percentage Spindle Power meters
Maddock Machine
2003-11-11 13:09:43 UTC
Re: [CAD_CAM_EDM_DRO] Percentage Spindle Power meters