Re: Deskcnc servo kits released with TurboCNC - motor speed
Posted by
Fred Smith
on 2003-11-12 13:50:41 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
Taig, or Sherlines. The adaptor plate is bolted to the existing
motor mount, then the motor is bolted onto the adaptor. The motors
have flats for setscrews.
That's with our powersupply kit which puts out just over 25Vdc at 110
Vac input. Theoretical top end is around 40 ipm with a 30 Vdc supply.
This depends a lot on the mechanicals of the mill, backlash, screw
wear, gib tightness, lubrication, etc.
Fred Smith - IMService
<davemucha@j...> wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@v...>The adaptors fit a flat nema 23 motor mount and should fit Maxnc,
> wrote:
> > Effective immediately, the DeskCNC servo driver kits will be
> > available with a TurboCNC bundle. Called Kit-2,
>
> > the package includes
> > 3 driver boards,
> > 3 servo motors w/ encoders,
> > 3 nema-23 adaptor/mounting plates,
> > a TurboCNC license.
> > Price is $399.00 US
> >
> > http://www.imsrv.com/deskcnc/bench_top_cnc_systems.htm
>
> Wow, this looks great.
>
> since it looks like a kit designed for the Sherline. but the motor
> torque looks fine for the mini-mill.
>
> optonal adapters would be neat.
Taig, or Sherlines. The adaptor plate is bolted to the existing
motor mount, then the motor is bolted onto the adaptor. The motors
have flats for setscrews.
> Is there a spec/data sheet that would show how fast one could moveOn a Sherline, rapids of around 30 ipm in X & Y and about 25 in Z.
> the motors ? Seeing that they have gear reduction heads, it seems
> the power would increase in exchange for speed.
> what speed rapids do you get on the Sherline ?
That's with our powersupply kit which puts out just over 25Vdc at 110
Vac input. Theoretical top end is around 40 ipm with a 30 Vdc supply.
This depends a lot on the mechanicals of the mill, backlash, screw
wear, gib tightness, lubrication, etc.
Fred Smith - IMService
Discussion Thread
Fred Smith
2003-11-11 16:35:15 UTC
Deskcnc servo kits released with TurboCNC
Kenneth Cardolino
2003-11-12 05:31:25 UTC
Re: Deskcnc servo kits released with TurboCNC
Fred Smith
2003-11-12 07:32:55 UTC
Re: Deskcnc servo kits released with TurboCNC
Chris Marek
2003-11-12 07:42:18 UTC
Re: [CAD_CAM_EDM_DRO] Deskcnc servo kits released with TurboCNC
Graham Stabler
2003-11-12 07:45:17 UTC
Re: Deskcnc servo kits released with TurboCNC
Fred Smith
2003-11-12 07:55:44 UTC
Re: Deskcnc servo kits released with TurboCNC
turbulatordude
2003-11-12 08:48:03 UTC
Re: Deskcnc servo kits released with TurboCNC - motor speed
Kenneth Cardolino
2003-11-12 10:01:33 UTC
Re: Deskcnc servo kits released with TurboCNC
Fred Smith
2003-11-12 13:50:41 UTC
Re: Deskcnc servo kits released with TurboCNC - motor speed