Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de
Posted by
Les Newell
on 2003-11-13 08:24:54 UTC
You are right. Thanks for the warning.
Not as good a bargain as I thought but they will still be OK for my Triac
mill.
Les
From: "Tony Jeffree" <tony@...>
Read the spec carefully - they are actually 4.5A/phase max (i.e., 9A
total), not 9A/phase. You can set currents up to 3.5A, and then apply the
30% "boost" feature to get to 4.5a.
Regards,
Tony
Not as good a bargain as I thought but they will still be OK for my Triac
mill.
Les
From: "Tony Jeffree" <tony@...>
Read the spec carefully - they are actually 4.5A/phase max (i.e., 9A
total), not 9A/phase. You can set currents up to 3.5A, and then apply the
30% "boost" feature to get to 4.5a.
Regards,
Tony
Discussion Thread
Les Newell
2003-11-13 08:24:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de