Re: [CAD_CAM_EDM_DRO] Stepper Motor
Posted by
Dan Mauch
on 2000-04-04 06:32:43 UTC
I don't have their catalog but have a lot of similar motors. The older ones
from the 1980's run about 60 oz inches. Newer one run at about 70-80 oz
inches.
Dan
-----Original Message-----
From: James Cullins <jcullins@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Monday, April 03, 2000 5:06 PM
Subject: [CAD_CAM_EDM_DRO] Stepper Motor
from the 1980's run about 60 oz inches. Newer one run at about 70-80 oz
inches.
Dan
-----Original Message-----
From: James Cullins <jcullins@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Monday, April 03, 2000 5:06 PM
Subject: [CAD_CAM_EDM_DRO] Stepper Motor
>I have 2 STH-55D203-4 steppers from Shinanodiscussion of shop built systems in the above catagories.
>I need specs on I did not see them on their web page.
>they are 1 amp 5 volt motors 1.8deg I need to know the OZ/IN, maybe
>someone could tell me form the above info.
>Thanks list
>Jim
>
>
>------------------------------------------------------------------------
>Get a NextCard Visa, in 30 seconds!
>1. Fill in the brief application
>2. Receive approval decision within 30 seconds
>3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
>Apply NOW!
>http://click.egroups.com/1/975/2/_/423600/_/954806809/
>------------------------------------------------------------------------
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>